REFLECTOR: Rudder hinge pins

[steve korney]

I just talked to Gary Hall and he said you can use his SS hinge pin and 
teflon housing on any MS2000 hinge assembly... Which is the extruded type 
material....  Not the bent over hinge type... I use it on my planes and it 
work very well....


Best... Steve



----Original Message Follows----
From: "John Tvedte" <JohnT at comp-sol.com>
Reply-To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Subject: RE: REFLECTOR: Rudder hinge pins
Date: Fri, 3 Mar 2006 07:50:58 -0600

http://www.uslan.com/hinge-kit.html

Gary Hall:  954-975-8018

Aileron and rudder hinges - it uses Teflon tubing and SS wire.  They fit 
perfectly.

John

	-----Original Message-----
	From: reflector-bounces at tvbf.org on behalf of Terry Miles
	Sent: Fri 3/3/2006 5:27 AM
	To: 'Velocity Aircraft Owners and Builders list'
	Cc:
	Subject: REFLECTOR: Rudder hinge pins




		Ledgend has it that some cozy guy sells an improved version of the rudder 
hinge pin so black AL shavings don't run back and stain the rudder.  It's a 
nylon or goretex sheath wrapped around an ss rod that fits in the kit 
provided hinge.  Anybody have a lead on that?
		Thanks
		Terry



<< winmail.dat >>


_______________________________________________
To change your email address, visit 
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html