REFLECTOR: 2nd Oil cooler

[MikeWatsonSpg at cs.com]

The original SERG manual 1996, had the plans and parts 
for a second oil cooler mounter on the wing, about one foot
rear of the strake and one foot outboard of the cowl.

The hole curved up then rearward and inward and exited just
rearward where the rudder cable entered the wing. The oil
cooler mounted on the flat side of the wing root, with a  
duct over the cooler and 3" scat tubing exiting through
the bottom of the lower cowl. The ram air is provided by
scoop similar ti the arm pit scoop.

Give Scott a call, maybe the still have some kits is stock.

Mike W.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060715/5985f9f1/attachment.html