REFLECTOR: Novice question

[Steve Goldman]

Al Gietzen wrote:
> 
> Putting the uni side down probably results in a little smoother upper 
> surface requiring less additional filler.  And, of course, then no one 
> will ever see if there are squigglesJ.

Ahh yes the real reason the factory does uni side down. :-) So again being
the novice here If you pulled the squiggles out on the cutting table uni
side up and then very carefully flipped the cloth as you put it on the
cores it seems like it might be fine. Of course having done no more than
look at the triax on the tube at this point I don't know if the fibers are
nearly stable enough to do this.

--
Steve