REFLECTOR: New velocity builder setting up shop.

[John Tvedte]

I would suggest that you not oil the tools - they can get oil on your
parts.  The HF tools are cheap enough - one just uses them until they
fail - then get another. They still last a long time.
 
John

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Jim Agnew
Sent: Wednesday, February 01, 2006 2:17 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: New velocity builder setting up shop.


<snip> 
 Your air tools will eat themselves up from the fiberglass dust so
Harbor Freight tools are good enough.  No warning just screech and
stop!!

----- Original Message ----
From: Alex Balic <alex157 at pwhome.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Wednesday, February 01, 2006 2:46:59 PM
Subject: RE: REFLECTOR: New velocity builder setting up shop.


 <snip>
 As far as the oil-less design- probably would be a good idea, although
none
of mine are- the air tools need oil so looking for oil free air is sort
of a
waste of time until you get to painting then you can install a filter.

I got most of my tools through harbor freight- have had the stuff
working
for years so quality is definitely good enough- you can get the sanding
pads
and disks from McMaster Carr.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060201/04a1df6c/attachment.html