REFLECTOR: Squat-switch setting

[Al Gietzen]

Subject: Re: REFLECTOR: Squat-switch setting

 

Al, that is about the same setting as mine.  It works fine - after I found a


pinched line going to the switch.  I also routed a line from the low side of


the switch to the cabin area. The open gear doors have got to be packing 

some air in, perhaps not at pitot pressure but certainly above static.

 

Ron

 

Good point.  Do you have a good enough seal between the area in front of the
bulkhead and the cabin that the pressure wouldn't be about the same?

 

Al

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20060428/afd7bcf3/attachment.html