REFLECTOR: Pitch Trim Spring

[John Dibble]

Steve,
That sounds like a good idea.  What effect were you looking at to decide on the
preferred adjustment angle?
John

steve korney wrote:

> Hi John...
>
> My sparrow strainer arms were wide enough at the leading edge of the airfoil
> to put a vertical slot in the front of the arms and make the front of the
> airfoil move up and down about 5 degrees in either direction...The rear of
> the airfoil
> is a pivot point and the front will move up and down... The airfoil is held
> on the arms by a 10/32 screws front and back on both sides... that makes it
> adjustable without having to move the arms...
>
> Best... Steve
>