REFLECTOR: Fuel Flow Sensor

[Brett Ferrell]

I agree that it should be fine, there is a note in the sensor section of 
this month's Kitplanes that claims the issue is vapor lock due to the sensor 
being on the suction side.  That *could* be an issue, but sounds like a 
wives tale to me.

Brett

----- Original Message ----- 
From: "Scott Derrick" <scott at tnstaafl.net>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Thursday, June 30, 2005 8:59 PM
Subject: Re: REFLECTOR: Fuel Flow Sensor


> As TEC says,  the fuel flow should be right before the divider.
>
> Scott
>
> HYTEC45 at aol.com wrote:
>
>> Know nothing about a "auto" installation, or your type of fuel injection, 
>> BUT can you place it just upstream of the divider leading to the 
>> injectors?  I placed mine between the servo and flow divder.  This 
>> meeters the actual flow going to the injectors.
>>  TEC
>>
>>------------------------------------------------------------------------
>>
>>_______________________________________________
>>To change your email address, visit 
>>http://www.tvbf.org/mailman/listinfo/reflector
>>
>>Visit the gallery!  www.tvbf.org/gallery
>>user:pw = tvbf:jamaicangoose
>>Check new archives: www.tvbf.org/pipermail
>>Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>