REFLECTOR: New Video with Anti-bounce

[Jim Agnew]

Tom & Scott,

And it works also!  When I saw Scott Bakers comments this was one of the three
ways I thought of debouncing the mechanism.  The other two were rotary springs
on the actuator shaft with the original roller and compression springs in the
door opening rods.  Nice work Tom.

Jim

--- Alex Balic <alex157 at pwhome.com> wrote:

> And just when I was thinking that it couldn't get any better...........
> 
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
> Behalf Of Scott Derrick
> Sent: Tuesday, June 07, 2005 6:45 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: REFLECTOR: New Video with Anti-bounce
> 
> Here's Tom's latest version..
> 
> http://www.tnstaafl.net/canards/NG%20Door%20Mechanism%20with%20Anti-Boun
> ce%20Spring.avi
> 
> Scott
> 
> >  
> >
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> 


James F. Agnew
Jim_Agnew_2 at Yahoo.Com
Tampa, FL
Velocity 173 Elite Aircraft Completed & Flying