REFLECTOR: XL cooling inlet size

[Randy Wharton]

That is correct.

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Richard Riley
Sent: Sunday, July 10, 2005 5:47 PM
To: Velocity Aircraft Owners and Builders list
Subject: RE: REFLECTOR: XL cooling inlet size

At 09:46 AM 7/10/05, you wrote:
>A picture says a thousand words/ I reduced the size of the 2 attached
>photos, so they shouldn't take up much space. The duct is actually a
complex
>shape, so it's a little difficult to describe.
>
>One photo shows the side view of the duct, and I PaintShopped some
>dimensions on it. If you continue the line up from the main duct, ignoring
>the top part of the duct that goes on top of the engine cover, that's how
>the measurements on the second photo were made.

OK, so in the first photo, the prop would eventually be to the right, and 
the nose to the left?

And in the second, we are looking at the aft side of the duct? 

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html