REFLECTOR: XL cooling inlet size

[Alex Balic]

Brett- how are the air-cooled folks connecting the ducting to the NACA
and the engine to allow for vibration....

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Brett Ferrell
Sent: Sunday, July 10, 2005 9:34 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: XL cooling inlet size

I've got my cowling on, but it's about 11 1/4" x 2 1/4".  Do you need to

know more precisely than that?

Brett

----- Original Message ----- 
From: "Richard Riley" <richard at riley.net>
To: "Velocity Aircraft Owners and Builders list" <reflector at tvbf.org>
Sent: Sunday, July 10, 2005 10:17 AM
Subject: RE: REFLECTOR: XL cooling inlet size


> At 03:58 AM 7/10/05, you wrote:
>>Richard, Are you referring to the ducts that go from the NACA scoops
to 
>>the
>>engine shroud?
>
> Yes.  Not the NACA ramp, just the final rectangular size where it
hooks to 
> the inlet runners.
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html
> 


_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html