REFLECTOR: 24 volts vs. 12 volts -- Important 'Upside'

KeithHallsten KeithHallsten at quiknet.com
Sun Jan 23 23:49:59 CST 2005


Of course, all the reasonably-priced seat heaters are automotive, and therefore designed for 12 volts!
 
  ----- Original Message ----- 
  From: Bob Jackson 
  To: Velocity Aircraft Owners and Builders list 
  Sent: Sunday, January 23, 2005 7:22 PM
  Subject: RE: REFLECTOR: 24 volts vs. 12 volts -- Important 'Upside'


  An important 'upside' of 24v. is that it also effectively doubles an alternator's current output capacity, usually with little, if any, increase in weight.  Having extra amperage available will be important to us to use for seat heaters (and possibly electrical heaters) for a warmer cabin during long flights at high cruising (cold) altitudes.

  Bob Jackson

        ----- Original Message ----- 
        From: Douglas Holub 
        To: Velocity Aircraft Owners and Builders list
        Sent: 1/16/2005 9:11:08 PM 
        Subject: Re: REFLECTOR: 24 volts vs. 12 volts


        If anyone is interested, I did some calculations: 30 feet of 2 AWG wire weighs 6 lbs, and will drop .468 volts with a 100 amp load; 30 feet of 4 AWG wire weighs 3.78 lbs and will drop .373 volts with a 50 amp load.

        Doug
          ----- Original Message ----- 
          From: Joe 
          To: Velocity Aircraft Owners and Builders list 
          Sent: Sunday, January 16, 2005 10:13 PM
          Subject: Re: REFLECTOR: 24 volts vs. 12 volts


          Doug,
          No real downside if all the components you use are rated for 24v (radios etc.)  You will need speed brake and trim actuators for 24v or build a voltage divider into those circuits.  I was going to go 24v myself, but since I am doing an auto conversion finding a 24v starter and/or 24v ECU made it easier to stay 12v.

          Be careful with your statement about wires being smaller by 1/2, wire size to current capability is not linear.  The wire length also has to be included into wire sizing so that there is no more than a 0.5v drop on 12v circuits and 1.0v on 24v circuits.  AC 43-13 is a good source for sizing wire in aircraft applications.

          One possible downside, if you want 110 vac power for say a laptop computer, you might have a hard time finding a 24V inverter.

          Joe
            ----- Original Message ----- 
            From: Douglas Holub 
            To: reflector at tvbf.org 
            Sent: Sunday, January 16, 2005 10:37 PM
            Subject: REFLECTOR: 24 volts vs. 12 volts


            If I have a 24 volt system I'll use half the current so my wires can be smaller by 1/2 and I'll save a pound or two. What's the downside?

            Doug


--------------------------------------------------------------------


            _______________________________________________
            To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

            Visit the gallery!  www.tvbf.org/gallery
            user:pw = tvbf:jamaicangoose
            Check new archives: www.tvbf.org/pipermail
            Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


----------------------------------------------------------------------


          _______________________________________________
          To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

          Visit the gallery!  www.tvbf.org/gallery
          user:pw = tvbf:jamaicangoose
          Check new archives: www.tvbf.org/pipermail
          Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


--------------------------------------------------------------------------


      _______________________________________________
      To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

      Visit the gallery!  www.tvbf.org/gallery
      user:pw = tvbf:jamaicangoose
      Check new archives: www.tvbf.org/pipermail
      Check old archives: http://www.tvbf.org/archives/velocity/maillist.html


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.tvbf.org/mailman/private/reflector/attachments/20050123/671ce42e/attachment.htm


More information about the Reflector mailing list