REFLECTOR:Fw: [Canards] Sun and Fun Pics
Ronnie Brown
reflector@tvbf.org
Mon, 19 Apr 2004 15:00:49 -0400
This is a multi-part message in MIME format.
------=_NextPart_000_009F_01C4261F.1ADAB900
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Chris,
You can do one wing/strake at a time. The wing needs to be in place =
when you fit the bottom strake, then again as you fit the top strake. =
You can probably put a wing on for the day to fit the strake, then take =
it off, do some additional fitting, and then put it back on for the =
final epoxy of the strake to the bottom of the CS spar, and if it is =
warm in Houston (for the next 6 months, right?), and a bit of halogen =
light heat, you should be able to remove the wing that evening after =
cutting the back of the strake off that is glued to the wing. =20
I roger the comment on having the plane at home. Do absolutely as much =
as you can in the garage before you have to go to the hanger. I would =
have stayed at home at least another year or so if I could have gotten =
my Fuselage with Center Section spar and strakes installed out of my 9' =
garage door. It looked like it MIGHT make it, but I wasn't taking any =
chances. You can do all of your strakes, fuel system, fuselage wiring, =
plumbing, instrument panel, interior, doors, before you go to the hanger =
for final assembly (it took me nearly a year after I had my strakes on, =
wiring done, panel done, RG system done, and engine hung). That year =
involved installing and connecting the prewired panel, interior, fuel =
plumbing, rudders, ailerons, and all of the debugging before being ready =
to fly).
Enjoy the journey!!!!!! It is worth it!!!!!!!
Ronnie
----- Original Message -----=20
From: Christopher Barber=20
To: reflector@tvbf.org=20
Sent: Monday, April 19, 2004 1:47 PM
Subject: RE: REFLECTOR:Fw: [Canards] Sun and Fun Pics
Thanks for the additional heads up. Agreed, I would prefer not to use =
the templates. I just don't know of a realistic option. Even though I =
love the photos, SWMBO, nor the City of Houston and homeowners assoc, =
would not be amused. She already "expresses concern" (yes, that is a =
euphemism) about fiberglass and micro dust getting in the house (her =
babysitting 7 dogs, however, is GOOD for the house...and the way it =
smells <g>. Her hobby is showing dogs).
Actually, that is one of the things I wished to discuss with Velocity. =
I am on the end of a slow moving list of 15 waiting for the privilege =
to pay $350.00 a month for a hanger. But the reality is, I like working =
in my garage and feel I get WAAAAY more done having my "hanger" in my =
garage and just off the kitchen. I will routinely go out and check a =
lay-up at 1 or 2 am and/or pull off peel ply before I go to work.
One of the web pages showed bolting the templates (via a jig) into the =
concrete floor. But, I did not see anything in the plans about that, so =
I was hoping for some insight from the factory folks.
Ok, finally a real question. How long do I need to have the wings on? =
I can roll the plane to the driveway, but could only leave it overnight =
if I sleep in the garage. (I live in and love Houston, but you do NOT =
leave things "out"......nor sticking out). Could it be realistic to =
mount the wings in the morning and remove them that night or the next =
day??? Even if possible, seems like it would be a real pain.
I may be able to squeeze a wing on, but, again, how long would this be =
needed. I may be able to handle Jana if it were only a relatively short =
period (that is if I could even make it fit.) Also, does having just =
one wing mounted effect the process since it is uneven?
I was able to make good use of the beautiful weekend. I went flying =
<g> and did some "repair building". I still have one minor project =
(glassing in the dog house) before I figure out how to get my plane into =
the garage with a wing on it (a shoe horn?). Even if possible, it would =
block access to the freezer, washer and dryer.....this too would not =
amuse Jana.....or, give in, and make the templates......I did just =
receive some more Velocipoxy....so, I am ready to add micro <g>.
Thanks again. I will be in deep contemplation.
All the best,
Chris
Christopher Barber
Attorney and Counselor at Law
=20
"Serving the needs of Senior Texans"
Barber Law Firm
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)
CBarber@TexasAttorney.net
www.TexasAttorney.net=20
-----Original Message-----
From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On =
Behalf Of Alex Balic
Sent: Saturday, April 17, 2004 4:27 PM
To: reflector@tvbf.org
Subject: RE: REFLECTOR:Fw: [Canards] Sun and Fun Pics
Chris-
Please tell me that you are going to build the strakes with the =
wings attached, and not with the factory supplied "templates" (er, I =
mean random strake leading edge positioning devices) if you do use =
the templates, be sure to order about another cubic foot of filler to =
fix the mismatch between the resulting strake leading edges and the =
wings.... Just FYI, been there, already paid the price....
Alex
-----Original Message-----
From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On =
Behalf Of CBarber
Sent: Thursday, April 15, 2004 10:46 PM
To: reflector@tvbf.org
Subject: RE: REFLECTOR:Fw: [Canards] Sun and Fun Pics
Thanks for the pix.
Ok, now a really quick rant/vent. I am all for fun and business =
opportunity at Sun & Fun, but I am mildly annoyed that no body was left =
back a Sebastian to be able address my technical questions and will not =
be back 'till the 20th. Dang it, I am about to start the dreaded =
STRAKES. It should be perfect weekend weather for building here in =
Houston, mid 70, LOW humidity and sunny and I am gonna be nervous =
starting this next big project without Branden's comforting words of =
support.....like the 411 on the PITA strake templates. Thanks for the =
vent. :-)
All the best,
Chris
=20
Christopher Barber
Attorney and Counselor at Law
=20
"Serving the needs of Senior Texans"
Barber Law Firm
11930 S Sam Houston Pkwy E
Suite 103
Houston, Texas 77089-4755
281-464-LAWS (5297)
CBarber@TexasAttorney.net
www.TexasAttorney.net=20
-----Original Message-----
From: reflector-admin@tvbf.org =
[mailto:reflector-admin@tvbf.org]On Behalf Of Ronnie Brown
Sent: Thursday, April 15, 2004 9:20 PM
To: reflector@tvbf.org
Subject: REFLECTOR:Fw: [Canards] Sun and Fun Pics
----- Original Message -----=20
From: Terry Lamp=20
To: Canards@tnstaafl.net ; Canard Aviators=20
Sent: Thursday, April 15, 2004 9:22 PM
Subject: [Canards] Sun and Fun Pics
Just back from S-N-F and thought I'd share a couple of pics.
Had to wait for the ice to melt off the plane this morning!!!
Quit a blow came through Monday night as you'll see.
Volunteered 30 hours in the 4 days we were there. It was a great =
time.
Terry
N977JT
=
http://www.imagestation.com/album/?id=3D4287147149&code=3D9200020&mode=3D=
invite
------------------------------------------------------------------------
_______________________________________________
Canards mailing list
Canards@tnstaafl.net
http://mail.tnstaafl.net/mailman/listinfo/canards_tnstaafl.net
------=_NextPart_000_009F_01C4261F.1ADAB900
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:o =3D "urn:schemas-microsoft-com:office:office"><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 5.50.4134.100" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY style=3D"COLOR: #000000; FONT-FAMILY: Arial" bgColor=3D#ffffff>
<DIV><FONT size=3D2>Chris,</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>You can do one wing/strake at a time. The wing =
needs to=20
be in place when you fit the bottom strake, then again as you fit the =
top=20
strake. You can probably put a wing on for the day to fit the =
strake, then=20
take it off, do some additional fitting, and then put it back on for the =
final=20
epoxy of the strake to the bottom of the CS spar, and if it is warm in =
Houston=20
(for the next 6 months, right?), and a bit of halogen light heat, you =
should be=20
able to remove the wing that evening after cutting the back of the =
strake off=20
that is glued to the wing. </FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>I roger the comment on having the plane at =
home. Do=20
absolutely as much as you can in the garage before you have to go to the =
hanger. I would have stayed at home at least another year or so if =
I could=20
have gotten my Fuselage with Center Section spar and =
strakes installed out=20
of my 9' garage door. It looked like it MIGHT make it, but I =
wasn't taking=20
any chances. You can do all of your strakes, fuel system, fuselage =
wiring,=20
plumbing, instrument panel, interior, doors, before you go to the hanger =
for=20
final assembly (it took me nearly a year after I had my strakes on, =
wiring done,=20
panel done, RG system done, and engine hung). That year involved=20
installing and connecting the prewired panel, interior, fuel plumbing, =
rudders,=20
ailerons, and all of the debugging before being ready to =
fly).</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Enjoy the journey!!!!!! It is worth=20
it!!!!!!!</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Ronnie</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3DCBarber@texasattorney.net=20
href=3D"mailto:CBarber@texasattorney.net">Christopher Barber</A> =
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dreflector@tvbf.org=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Monday, April 19, 2004 =
1:47=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: REFLECTOR:Fw: =
[Canards] Sun=20
and Fun Pics</DIV>
<DIV><BR></DIV>
<DIV><SPAN class=3D955351217-19042004><FONT size=3D2>Thanks for the =
additional=20
heads up. Agreed, I would prefer not to use the templates. I =
just don't=20
know of a realistic option. Even though I love the photos, =
SWMBO, nor=20
the City of Houston and homeowners assoc, would not be amused. She =
already=20
"expresses concern" (yes, that is a euphemism) about fiberglass and =
micro dust=20
getting in the house (her babysitting 7 dogs, however, is GOOD for the =
house...and the way it smells <g>. Her hobby is =
showing=20
dogs).</FONT></SPAN></DIV>
<DIV><SPAN class=3D955351217-19042004><FONT =
size=3D2></FONT></SPAN> </DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>Actually, that is =
one of the=20
things I wished to discuss with Velocity. I am on the end of =
a slow=20
moving list of 15 waiting for the privilege to pay $350.00 a month for =
a=20
hanger. But the reality is, I like working in my garage =
and feel I=20
get WAAAAY more done having my "hanger" in my garage and just off the=20
kitchen.</SPAN> <SPAN class=3D955351217-19042004>I will routinely =
go out=20
and check a lay-up at 1 or 2 am and/or pull off peel ply before I go =
to=20
work.</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>One of the web =
pages showed=20
bolting the templates (via a jig) into the concrete floor. =
But, I=20
did not see anything in the plans about that, so I was hoping for some =
insight=20
from the factory folks.</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>Ok, finally a =
real=20
question. How long do I need to have the wings on? I can =
roll the=20
plane to the driveway, but could only leave it overnight if I sleep in =
the=20
garage. (I live in and love Houston, but you do NOT leave things=20
"out"......nor sticking out). Could it be realistic to mount the wings =
in the=20
morning and remove them that night or the next day??? Even if =
possible,=20
seems like it would be a real pain.</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>I may be able to =
squeeze a=20
wing on, but, again, how long would this be needed. I may be able to =
handle=20
Jana if it were only a relatively short period (that is if I could =
even make=20
it fit.) Also, does having just one wing mounted effect the =
process=20
since it is uneven?</SPAN></FONT></DIV></SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>I was able to =
make good use=20
of the beautiful weekend. I went flying <g> and did some "repair =
building". I still have one minor project (glassing in the dog house) =
before I=20
figure out how to get my plane into the garage with a wing on it (a =
shoe=20
horn?). Even if possible, it would block access to the freezer, washer =
and=20
dryer.....this too would not amuse Jana.....or, give in, and make the=20
templates......I did just receive some more Velocipoxy....so, I am =
ready to=20
add micro <g>.</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>Thanks again. I =
will be in=20
deep contemplation.</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN class=3D955351217-19042004>All the=20
best,</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004>Chris</SPAN></FONT></DIV>
<DIV><FONT size=3D2><SPAN =
class=3D955351217-19042004></SPAN></FONT> </DIV>
<DIV><FONT size=3D2><SPAN=20
class=3D955351217-19042004></SPAN></FONT> </DIV><STRONG><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'">
<P class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"><B><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'">Christopher=20
Barber<o:p></o:p></SPAN></B></P>
<P class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth BT'; =
mso-bidi-font-size: 12.0pt">Attorney=20
and Counselor at Law<o:p></o:p></SPAN></P>
<P class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth BT'; =
mso-bidi-font-size: 12.0pt"> <o:p></o:p></SPAN></P>
<P class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"><B><I><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: 'CopprplGoth BT'; =
mso-bidi-font-size: 10.0pt">"Serving=20
the needs of Senior Texans"</SPAN></I></B><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth =
BT'"><BR><BR></SPAN><STRONG><U><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'">Barber Law=20
Firm</SPAN></U></STRONG><B><U><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'"><BR></SPAN></U></B><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth BT'">11930 S Sam =
Houston=20
Pkwy E<BR>Suite 103<BR>Houston, Texas 77089-4755<BR></SPAN><B><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'; mso-bidi-font-size: =
10.0pt">281-464-LAWS=20
(5297</SPAN></B><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth =
BT'">)<BR><BR><BR>CBarber@TexasAttorney.net<BR></SPAN><SPAN=20
style=3D"FONT-SIZE: 10pt"><A =
href=3D"http://www.texasattorney.net/"><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'"><FONT=20
=
color=3D#800080>www.TexasAttorney.net</FONT></SPAN></A></SPAN> </P>
<P class=3DSection1 style=3D"MARGIN: 0in 0in 0pt"> </P>
<P class=3DSection1 style=3D"MARGIN: 0in 0in 0pt" align=3Dleft><A =
target=3D_blank=20
href=3D"http://www.smileycentral.com/?partner=3DZSzeb001"><IMG =
alt=3DTexas=20
src=3D"http://smileys.smileycentral.com/cat/462.gif" border=3D0=20
NOSEND=3D"1"></A></P></SPAN></STRONG>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
size=3D2>-----Original Message-----<BR><B>From:</B> =
reflector-admin@tvbf.org=20
[mailto:reflector-admin@tvbf.org]<B>On Behalf Of </B>Alex=20
Balic<BR><B>Sent:</B> Saturday, April 17, 2004 4:27 PM<BR><B>To:</B> =
reflector@tvbf.org<BR><B>Subject:</B> RE: REFLECTOR:Fw: [Canards] =
Sun and=20
Fun Pics<BR><BR></FONT></DIV>
<DIV><SPAN class=3D198072421-17042004><FONT =
size=3D2>Chris-</FONT></SPAN></DIV>
<DIV><SPAN class=3D198072421-17042004><FONT size=3D2>Please tell me =
that you are=20
going to build the strakes with the wings attached, and not with the =
factory=20
supplied "templates" (er, I mean random strake leading edge=20
positioning devices) if you do use the templates, =
be sure=20
to order about another cubic foot of filler to fix the mismatch =
between the=20
resulting strake leading edges and the wings.... Just FYI, been =
there,=20
already paid the price....</FONT></SPAN></DIV>
<DIV><SPAN class=3D198072421-17042004><FONT =
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D198072421-17042004><FONT =
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D198072421-17042004><FONT =
size=3D2>Alex</FONT></SPAN></DIV>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
size=3D2>-----Original Message-----<BR><B>From:</B> =
reflector-admin@tvbf.org=20
[mailto:reflector-admin@tvbf.org]<B>On Behalf Of=20
</B>CBarber<BR><B>Sent:</B> Thursday, April 15, 2004 10:46=20
PM<BR><B>To:</B> reflector@tvbf.org<BR><B>Subject:</B> RE: =
REFLECTOR:Fw:=20
[Canards] Sun and Fun Pics<BR><BR></FONT></DIV>
<DIV><SPAN class=3D571113704-16042004><FONT size=3D2>Thanks for =
the=20
pix.</FONT></SPAN></DIV>
<DIV><SPAN class=3D571113704-16042004><FONT=20
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D571113704-16042004><FONT size=3D2>Ok, now a =
really quick=20
rant/vent. I am all for fun and business opportunity at Sun & =
Fun, but=20
I am mildly annoyed that no body was left back a Sebastian to be =
able=20
address my technical questions and will not be back 'till the =
20th.=20
Dang it, I am about to start the dreaded STRAKES. It should be =
perfect=20
weekend weather for building here in Houston, mid 70, LOW humidity =
and=20
sunny and I am gonna be nervous starting this next big project =
without=20
Branden's comforting words of support.....like the 411 on the PITA =
strake=20
templates. Thanks for the vent. :-)</FONT></SPAN></DIV>
<DIV><SPAN class=3D571113704-16042004><FONT=20
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D571113704-16042004><FONT size=3D2>All the=20
best,</FONT></SPAN></DIV>
<DIV><SPAN class=3D571113704-16042004><FONT=20
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D571113704-16042004><FONT =
size=3D2>Chris</FONT></SPAN></DIV>
<DIV><SPAN class=3D571113704-16042004><FONT=20
size=3D2></FONT></SPAN> </DIV>
<DIV> </DIV>
<DIV class=3DSection1>
<P class=3DMsoNormal style=3D"MARGIN-BOTTOM: =
12pt"> <o:p></o:p></P>
<P style=3D"MARGIN: 0in 0in 0pt"><B><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'">Christopher=20
Barber<o:p></o:p></SPAN></B></P>
<P style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth BT'; =
mso-bidi-font-size: 12.0pt">Attorney=20
and Counselor at Law<o:p></o:p></SPAN></P>
<P style=3D"MARGIN: 0in 0in 0pt"><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth BT'; =
mso-bidi-font-size: 12.0pt"> <o:p></o:p></SPAN></P>
<P style=3D"MARGIN: 0in 0in 0pt"><B><I><SPAN=20
style=3D"FONT-SIZE: 11pt; FONT-FAMILY: 'CopprplGoth BT'; =
mso-bidi-font-size: 10.0pt">"Serving=20
the needs of Senior Texans"</SPAN></I></B><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth =
BT'"><BR><BR></SPAN><STRONG><U><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'">Barber Law=20
Firm</SPAN></U></STRONG><B><U><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'"><BR></SPAN></U></B><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth BT'">11930 S =
Sam Houston=20
Pkwy E<BR>Suite 103<BR>Houston, Texas =
77089-4755<BR></SPAN><B><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth BT'; mso-bidi-font-size: =
10.0pt">281-464-LAWS=20
(5297</SPAN></B><SPAN=20
style=3D"FONT-SIZE: 10pt; FONT-FAMILY: 'CopprplGoth =
BT'">)<BR><BR><BR>CBarber@TexasAttorney.net<BR></SPAN><SPAN=20
style=3D"FONT-SIZE: 10pt"><A =
href=3D"http://www.texasattorney.net/"><SPAN=20
style=3D"FONT-FAMILY: 'CopprplGoth =
BT'">www.TexasAttorney.net</SPAN></A></SPAN> </P>
<P style=3D"MARGIN: 0in 0in 0pt"> </P>
<P style=3D"MARGIN: 0in 0in 0pt"><A target=3D_blank=20
href=3D"http://www.smileycentral.com/?partner=3DZSzeb001"><IMG =
alt=3DTexas=20
src=3D"http://smileys.smileycentral.com/cat/462.gif" border=3D0=20
NOSEND=3D"1"></A></P></DIV>
<BLOCKQUOTE>
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
size=3D2>-----Original Message-----<BR><B>From:</B>=20
reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]<B>On =
Behalf=20
Of </B>Ronnie Brown<BR><B>Sent:</B> Thursday, April 15, 2004 =
9:20=20
PM<BR><B>To:</B> reflector@tvbf.org<BR><B>Subject:</B> =
REFLECTOR:Fw:=20
[Canards] Sun and Fun Pics<BR><BR></FONT></DIV>
<DIV> </DIV>
<DIV style=3D"FONT: 10pt arial">----- Original Message -----=20
<DIV style=3D"BACKGROUND: #e4e4e4; font-color: =
black"><B>From:</B> <A=20
title=3Dtlamp@columbus.rr.com =
href=3D"mailto:tlamp@columbus.rr.com">Terry=20
Lamp</A> </DIV>
<DIV><B>To:</B> <A title=3DCanards@tnstaafl.net=20
href=3D"mailto:Canards@tnstaafl.net">Canards@tnstaafl.net</A> ; =
<A=20
title=3Dcanard-aviators@yahoogroups.com=20
href=3D"mailto:canard-aviators@yahoogroups.com">Canard =
Aviators</A> </DIV>
<DIV><B>Sent:</B> Thursday, April 15, 2004 9:22 PM</DIV>
<DIV><B>Subject:</B> [Canards] Sun and Fun Pics</DIV></DIV>
<DIV><BR></DIV><LABEL id=3DHbSession =
SessionId=3D"1164370015"></LABEL>
<DIV><FONT size=3D2>Just back from S-N-F and thought I'd share a =
couple of=20
pics.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Had to wait for the ice to melt off the =
plane this=20
morning!!!</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Quit a blow came through Monday night as =
you'll=20
see.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Volunteered 30 hours in the 4 days we were =
there. It=20
was a great time.</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2>Terry</FONT></DIV>
<DIV><FONT size=3D2>N977JT</FONT></DIV>
<DIV><FONT size=3D2></FONT> </DIV>
<DIV><FONT size=3D2><A=20
=
href=3D"http://www.imagestation.com/album/?id=3D4287147149&code=3D920=
0020&mode=3Dinvite">http://www.imagestation.com/album/?id=3D428714714=
9&code=3D9200020&mode=3Dinvite</A></FONT></DIV>
<DIV> </DIV>
<P></P>
<P>
<HR>
=
<P></P>_______________________________________________<BR>Canards=20
mailing list<BR><A=20
=
href=3D"mailto:Canards@tnstaafl.net">Canards@tnstaafl.net</A><BR>http://m=
ail.tnstaafl.net/mailman/listinfo/canards_tnstaafl.net<BR></BLOCKQUOTE></=
BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_009F_01C4261F.1ADAB900--