REFLECTOR:FG nose wheel tire removal
douglas holub
reflector@tvbf.org
Mon, 5 May 2003 20:40:29 -0500
This is a multi-part message in MIME format.
------=_NextPart_000_0012_01C31346.91175610
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Thanks everybody. This wheel assembly is 16 years old, and maybe it =
doesn't look like yours do now. There's only one long set screw. The =
axle is as long as the fork is wide. I can see a 5/8" axle flush with =
the outside of both sides of the fork, but the axle is 3/4" where it =
goes through the wheel bearings. Both ends of the axle have a tapped =
hole in the center; that's where my wheel pant attaches. There's no =
screwdriver slot with which to turn the axle. I wonder if the 3/4" =
diameter part is just a bushing and the axle is 5/8" diameter and just =
pressed in.
Doug
----- Original Message -----=20
From: Laurence Coen=20
To: reflector@tvbf.org=20
Sent: Monday, May 05, 2003 8:19 PM
Subject: Re: REFLECTOR:FG nose wheel tire removal
Doug,=20
I am guessing that you are not the builder of your aircraft. The =
wheel needs to be removed from the fork by extracting the axle. The =
wheel has through bolts that when removed allow the wheel to be =
separated into two halves which allows the tire to be removed. The rest =
is obvious.
Larry Coen=20
SE RG Franklin
----- Original Message -----=20
From: douglas holub=20
To: reflector@tvbf.org=20
Sent: Monday, May 05, 2003 7:30 PM
Subject: REFLECTOR:FG nose wheel tire removal
My FG nose gear tire is flat. Can somebody tell me how to remove =
the tire and the tube? It looks like the fork has everything trapped.
Doug Holub
------=_NextPart_000_0012_01C31346.91175610
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1170" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Thanks everybody. This wheel =
assembly is 16=20
years old, and maybe it doesn't look like yours do now. There's =
only one=20
long set screw. The axle is as long as the fork is =
wide. I can=20
see a 5/8" axle flush with the outside of both sides of the fork, =
but the=20
axle is 3/4" where it goes through the wheel bearings. Both ends =
of the=20
axle have a tapped hole in the center; that's where my wheel pant=20
attaches. There's no screwdriver slot with which to turn the =
axle. I=20
wonder if the 3/4" diameter part is just a bushing and the axle is 5/8" =
diameter=20
and just pressed in.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Doug</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Dlwcoen@hotmail.com =
href=3D"mailto:lwcoen@hotmail.com">Laurence Coen</A>=20
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dreflector@tvbf.org=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Monday, May 05, 2003 8:19 =
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: REFLECTOR:FG nose =
wheel tire=20
removal</DIV>
<DIV><BR></DIV>
<DIV><FONT face=3DArial size=3D2>Doug, </FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>I am guessing that you are not the =
builder of=20
your aircraft. The wheel needs to be removed from the fork by =
extracting=20
the axle. The wheel has through bolts that when removed allow =
the wheel=20
to be separated into two halves which allows the tire to be =
removed. The=20
rest is obvious.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Larry Coen </FONT></DIV>
<DIV><FONT face=3DArial size=3D2>SE RG Franklin</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Ddoug.holub@worldnet.att.net=20
href=3D"mailto:doug.holub@worldnet.att.net">douglas holub</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dreflector@tvbf.org=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Monday, May 05, 2003 =
7:30=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> REFLECTOR:FG nose =
wheel tire=20
removal</DIV>
<DIV><BR></DIV>
<DIV><FONT face=3DArial size=3D2>My FG nose gear tire is flat. =
Can=20
somebody tell me how to remove the tire and the tube? It looks =
like=20
the fork has everything trapped.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Doug=20
Holub</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0012_01C31346.91175610--