REFLECTOR:Balancer

[Tony Babb]

Seems to me like you've done (much) more than any vendor can reasonably
expect a customer to do. Suggest you tell them you want an exchange unit or
your money back, warranty or not this unit appears to be not fit for the
purpose described.

----- Original Message -----
From: <HYTEC45@aol.com>
To: <reflector@tvbf.org>
Sent: Monday, June 09, 2003 3:29 PM
Subject: Re: REFLECTOR:Balancer


> In a message dated 6/9/03 2:27:40 PM Pacific Daylight Time,
> wamowens@bellsouth.net writes:
>
> <<  Is your propeller white? Maybe
>  white to retroreflective  tape is not enough contrast.  >>
>
> On the Velocity it's white (mt), but not the C-172(black), Lancair(black),
or
> EZ (wood).  I even have gone as far to cover the area under the reflective
> tape with blue masking tape to prevent reflection.  Also, I positioned the
> sensor under the wing to cast shade on it, and also adjusted the
photooptic sensor
> to be perpendicular to the reflective tape.  The tape is the honeycombed
tape
> supplied and the peanut light always illuminates statically.  I sweep the
> reflective tape through the cone of illumination of the peanut light to
get the
> center of the reflective area.
>
> The unit is sitting in my office now.  I guess if I get the motivation I
will
> install AGAIN, then take an AVI file of it not working for Vibetech.
>
> TEC
> _______________________________________________
> To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  tvbf:jamaicangoose