REFLECTOR:roll over jigs
Ronnie Brown
reflector@tvbf.org
Wed, 2 Jul 2003 07:52:31 -0400
This is a multi-part message in MIME format.
------=_NextPart_000_0025_01C3406E.E45A28C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I'd be careful using anything other than lung power to pressurize or =
pull vacuum on the tanks. Velocity says to limit the pressure to no more =
than 1500' on an altimeter which is less than 1 psi. Using any more =
pressure than this can create an even larger leak.
Ronnie
----- Original Message -----=20
From: dean fitzbag=20
To: reflector@tvbf.org=20
Sent: Tuesday, July 01, 2003 10:59 PM
Subject: Re: REFLECTOR:roll over jigs
I'll try that tomorrow. Any ideas on how to apply the vacuum?
----- Original Message -----=20
From: Brian Michalk=20
To: reflector@tvbf.org=20
Sent: Tuesday, July 01, 2003 6:15 PM
Subject: RE: REFLECTOR:roll over jigs
Get some small nylon tubing. Hold one end to your ear, and snake =
the other end around like you are sniffing for something. You'll hear =
it when you come across the leak.
To patch the leak, put a slight vacuum on the tank, and dab on some =
epoxy/bubbles/cab-o-sil.
Brian Michalk <http://www.michalk.com>
Life is what you make of it ... never wish you had done something.
Aviator, experimental aircraft builder, motorcyclist, SCUBA diver
musician, home-brewer, entrepreneur and mostly single
=20
-----Original Message-----
From: reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]On =
Behalf Of dean fitzbag
Sent: Tuesday, July 01, 2003 5:17 PM
To: reflector@tvbf.org
Subject: Re: REFLECTOR:roll over jigs
Yes, except for leak testing which is not going very well. When I =
apply a small pressure I can hear the hissing of the air leaving =
somewhere. I've applied soapy water everywhere I can see, but to no =
avail. Using a brush taped to a long stick I have been painting the =
back bulkhead, but so far, no luck.
----- Original Message -----=20
From: Mike Pollock=20
To: reflector@tvbf.org=20
Sent: Tuesday, July 01, 2003 1:41 PM
Subject: RE: REFLECTOR:roll over jigs
Hi Dean,
Have you finished your stakes already?
Mike Pollock
EAA Tech Councelor #4357
-----Original Message-----
From: reflector-admin@tvbf.org =
[mailto:reflector-admin@tvbf.org]On Behalf Of dean fitzbag
Sent: Sunday, June 29, 2003 1:00 PM
To: reflector
Subject: REFLECTOR:roll over jigs
I am finished using the roll over jigs that I got form Alec =
Balic. They are available to anyone who needs them for free. I live =
about 45 miles north of Dallas, Tx.
------=_NextPart_000_0025_01C3406E.E45A28C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML xmlns:v xmlns:o><HEAD>
<META http-equiv=3DContent-Type =
content=3Dtext/html;charset=3Diso-8859-1>
<STYLE></STYLE>
<META content=3D"MSHTML 5.50.4134.600" name=3DGENERATOR></HEAD>
<BODY id=3DMailContainerBody=20
style=3D"PADDING-LEFT: 10px; FONT-WEIGHT: normal; FONT-SIZE: 10pt; =
COLOR: #000000; BORDER-TOP-STYLE: none; PADDING-TOP: 15px; FONT-STYLE: =
normal; FONT-FAMILY: Verdana; BORDER-RIGHT-STYLE: none; =
BORDER-LEFT-STYLE: none; TEXT-DECORATION: none; BORDER-BOTTOM-STYLE: =
none"=20
bgColor=3D#ffffff leftMargin=3D0 topMargin=3D0 name=3D"Compose message =
area"=20
CanvasTabStop=3D"true" acc_role=3D"text">
<DIV><FONT face=3DArial>I'd be careful using anything other than lung =
power to=20
pressurize or pull vacuum on the tanks. Velocity says to limit the =
pressure to=20
no more than 1500' on an altimeter which is less than 1 psi. Using =
any=20
more pressure than this can create an even larger leak.</FONT></DIV>
<DIV><FONT face=3DArial></FONT> </DIV>
<DIV><FONT face=3DArial>Ronnie</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Ddfitzbag@msn.com href=3D"mailto:dfitzbag@msn.com">dean =
fitzbag</A>=20
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Dreflector@tvbf.org=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, July 01, 2003 =
10:59=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> Re: REFLECTOR:roll =
over=20
jigs</DIV>
<DIV><BR></DIV>
<DIV=20
style=3D"FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Verdana">
<DIV>I'll try that tomorrow. Any ideas on how to apply the =
vacuum?</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV style=3D"FONT: 10pt arial"><B>From:</B> <A=20
href=3D"mailto:michalk@awpi.com">Brian Michalk</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, July 01, 2003 =
6:15=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: REFLECTOR:roll =
over=20
jigs</DIV>
<DIV><BR></DIV>
<DIV><SPAN class=3D976511223-01072003>Get some small nylon =
tubing. =20
Hold one end to your ear, and snake the other end around like you =
are=20
sniffing for something. You'll hear it when you come across =
the=20
leak.</SPAN></DIV>
<DIV><SPAN class=3D976511223-01072003></SPAN> </DIV>
<DIV><SPAN class=3D976511223-01072003>To patch the leak, put a =
slight vacuum=20
on the tank, and dab on some epoxy/bubbles/cab-o-sil.</SPAN></DIV>
<DIV> </DIV>
<P> Brian Michalk <<A target=3D_blank=20
=
href=3D"http://www.michalk.com/">http://www.michalk.com</A>><BR>Life =
is=20
what you make of it ... never wish you had done =
something.<BR>Aviator,=20
experimental aircraft builder, motorcyclist, SCUBA =
diver<BR>musician,=20
home-brewer, entrepreneur and mostly single<BR> </P>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 =
2px solid; MARGIN-RIGHT: 0px">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT=20
face=3DTahoma>-----Original Message-----<BR><B>From:</B>=20
reflector-admin@tvbf.org [mailto:reflector-admin@tvbf.org]<B>On =
Behalf Of=20
</B>dean fitzbag<BR><B>Sent:</B> Tuesday, July 01, 2003 5:17=20
PM<BR><B>To:</B> reflector@tvbf.org<BR><B>Subject:</B> Re: =
REFLECTOR:roll=20
over jigs<BR><BR></FONT></DIV>
<DIV=20
style=3D"FONT-WEIGHT: normal; FONT-SIZE: 10pt; COLOR: #000000; =
FONT-FAMILY: Verdana">
<DIV>Yes, except for leak testing which is not going very =
well. When=20
I apply a small pressure I can hear the hissing of the air leaving =
somewhere. I've applied soapy water everywhere I can see, =
but to no=20
avail. Using a brush taped to a long stick I have been =
painting the=20
back bulkhead, but so far, no luck.</DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- =
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>From:</B> <A=20
href=3D"mailto:m.pollock@verizon.net">Mike Pollock</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
href=3D"mailto:reflector@tvbf.org">reflector@tvbf.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, July 01, =
2003 1:41=20
PM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> RE: =
REFLECTOR:roll over=20
jigs</DIV>
<DIV><BR></DIV>
<DIV><SPAN class=3D639143118-01072003>Hi Dean,</SPAN></DIV>
<DIV><SPAN class=3D639143118-01072003></SPAN> </DIV>
<DIV><SPAN class=3D639143118-01072003>Have you finished your =
stakes=20
already?</SPAN></DIV>
<DIV><SPAN class=3D639143118-01072003></SPAN> </DIV>
<DIV><SPAN class=3D639143118-01072003>Mike Pollock</SPAN></DIV>
<DIV><SPAN class=3D639143118-01072003>EAA Tech Councelor=20
#4357</SPAN></DIV>
<DIV><SPAN class=3D639143118-01072003></SPAN> </DIV>
<BLOCKQUOTE dir=3Dltr style=3D"MARGIN-RIGHT: 0px">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma>-----Original Message-----<BR><B>From:</B> <A=20
=
href=3D"mailto:reflector-admin@tvbf.org">reflector-admin@tvbf.org</A>=20
[mailto:reflector-admin@tvbf.org]<B>On Behalf Of </B>dean=20
fitzbag<BR><B>Sent:</B> Sunday, June 29, 2003 1:00 =
PM<BR><B>To:</B>=20
reflector<BR><B>Subject:</B> REFLECTOR:roll over=20
jigs<BR><BR></FONT></DIV>
<DIV>I am finished using the roll over jigs that I got form =
Alec=20
Balic. They are available to anyone who needs them =
for=20
free. I live about 45 miles north of Dallas,=20
=
Tx.</DIV></BLOCKQUOTE></BLOCKQUOTE></DIV></BLOCKQUOTE></BLOCKQUOTE></DIV>=
</BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0025_01C3406E.E45A28C0--