Close up of main jig. Bolts to wing attach points. Wing is in a position so the highest point of leading edge just reachable to paint.

Close up of the aileron well support jig. A 6 inch wide peice of plywood is screwed to teh horizontal 2x6 support. This piece of plywood is what the wing rests on and fits up in the aileron well. This provides ample clearance to spray the trailing edges.

View of top of wing showing both jigs. The rightmost jig rests in the aileron well , the wing is not attached to it. The wing is steady enough for wipe down, very very small spot sanding and painting. This is not a sanding jig.

View of the bottom side of the wing.