[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

REFLECTOR: Cowl screws

To: reflector <reflector@awpi.com>
Subject: REFLECTOR: Cowl screws
From: Bob <bgins@intrstar.net>
Date: Wed, 23 Sep 1998 11:23:44 -0400
Reply-To: reflector@awpi.com, Bob <bgins@intrstar.net>
Sender: owner-reflector@awpi.com

Re:  cowl screws etc.

FWIW,

I put on the #8 nutplates, screws and washers as supplied, but if I had
it to do over I would use #10's.  The #8 screws seem to strip out
easier, at least for me.

Bob

Follow-Ups:
- Re: REFLECTOR: Cowl screws
  - From: Alan Shaw <wingco@iu.net>

Prev by Date: Re: REFLECTOR: Lyco 540 probs
Next by Date: Re: REFLECTOR: Cowl screws
Prev by thread: Re: REFLECTOR: Cowel attachment hardware?
Next by thread: Re: REFLECTOR: Cowl screws
Index(es):
- Date
- Thread