[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Elevator Trim Tab

In a message dated 98-07-01 10:16:51 EDT, you write:

<<  Some of the servos I am looking at
 	travel 60 degrees in .2 to .3 seconds.  >>

I think you'll find that it will only take about 1/2 degree of movement at
most in cruse to make the change needed.  You will not be able to controll a
servo that fast.  Insted of P.I.O. (pilot induced oscillation) you will have
S.I.O.. (servo).  Have the "sic-sack's" handy, and count me out.