Canard alignment

["Al Gietzen" <alventures@email.msn.com>]

Bob wrote: 

 

> What is really interesting to me is the fact that we all have this "gap."

 

Through a series of measurements I made over a year ago, I determined that the nose bolt hole was about 3/16 too far toward the pilots side.  This was confirmed by the factory; but I guess considered to be within the error bars since the mold is not exactly true, and individual shells may vary a bit after curing. I did post it to the reflector at that time.  If you used the measurment from the hole to the side in placing the bulkheads, that difference is most noticeable for the canard bulkhead. 

 

Al Gietzen