REFLECTOR: Fuel system install

[Chris Barber]

I too used the finger strainers with the depression in the inner skin. They are quite easy remove to inspect. The Velocity Views Newsletter had an article on the process that I came across about the same time I was putting in the fuel lines.

Chris

Sent from my iPhone 5

On Jan 2, 2014, at 22:52, "Glenn Falkenberg" <airmech2 at gmail.com<mailto:airmech2 at gmail.com>> wrote:

Hi All
I have a two part question for the group on fuel system installation.  First what is the general thought on the use of a fuel tank selector valve.  Are their advantages or a necessity for using one?  What are the pros and cons?  Second does anyone have suggestions for installing the fuel feed line and strainer in the tank?  The manual says to just microglass the line in place and use a screen around the inlet.  I would like to use a more robust method, I.E. bulkhead fitting.  Any input is appreciated.
 Thanks
Glenn Falkenberg
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140104/9c7a301b/attachment.html>