REFLECTOR: Door seals
Brian Michalk
michalk at awpi.com
Thu Feb 27 10:26:30 CST 2014
Are those the Miata seats?
On 2/27/2014 10:17 AM, Andrew Ellzey wrote:
> Ron,
>
> This is what I am using instead of the factory seal. This is working
> great for me, easy to close the door, and no air leaks.
> http://www.mcmaster.com/#1120a321/=qvkyzb
>
> I have attached an old photo, showing the seal installed. It takes
> approximately 12' for each door on an XL. I have since replaced this
> seal to get rid of the gap at the bottom that is shown in this photo.
>
> Good luck,
>
> Andrew Ellzey
> N151AJ
> XLRG
>
> *From:* Ron N VelocityXLFG <velocityxl at fastmail.fm>
> *To:* Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> *Sent:* Wednesday, February 26, 2014 8:52 AM
> *Subject:* REFLECTOR: Door seals
>
> Does any one know of a trick to make the door seals softer? My
> kit is
> over 14 years old and I
> think the rubber door seals that came with my kit are to hard now.
> The
> door closed fine
> before I installed the seals now I can not get the pins to insert
> into
> the latch .
>
> Ron
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives:
> http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140227/93ee9235/attachment-0001.html>
More information about the Reflector
mailing list