REFLECTOR: spinner

Ron N VelocityXLFG velocityxl at fastmail.fm
Fri Feb 21 11:21:58 CST 2014


Cut large squares of coarse bid and layed  it over the top and draped it 
down. Took quite
a bit of stimping to get it to lay out flat.

Ron

On 2/21/2014 11:05 AM, Jerry Teitsma wrote:
> Interesting discussion.  I may make one.  How did you apply the carbon 
> fiber to the shaped foam?
>
> ------------------------------------------------------------------------
> *From: *nmflyer1 at aol.com
> *To: *reflector at tvbf.org
> *Sent: *Friday, February 21, 2014 9:25:11 AM
> *Subject: *Re: REFLECTOR: spinner
>
> That's what I'm going to have to do. Was thinking about starting the 
> same way. Any words of advice?
> Kurt
>
>
> -----Original Message-----
> From: Ron N VelocityXLFG <velocityxl at fastmail.fm>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Fri, Feb 21, 2014 9:20 am
> Subject: Re: REFLECTOR: spinner
>
> How about making your own :) I did  made mine  out of Carbon fiber. 
> Fun thing to do during the winter months.
> Ron
>
> On 2/21/2014 7:10 AM, Brett Ferrell wrote:
>
>     You could look at Klaus' or Ken Miller's spinners.  They're KISS
>     style as well.  I used a Miller on my Catto, but I replaced the
>     glass bulkhead with metal after Zietlin's prop loss incident.
>     Miller http://long-ez.com/custom-parts.html
>     Klaus http://www.lightspeedengineering.com/Services/Spinner.htm
>     -- 
>     Brett Ferrell
>     On Thu, Feb 20, 2014, at 09:33 PM, David Ullman wrote:
>
>         I am finally going to paint N-444DX, my Velosity SEFG.  It has
>         about 120
>         hours on it, so it is about time.  I need a spinner.  I have a
>         Catto
>         fixed
>         pitch prop.  He recommends Chris Wade's spinners. 
>         Unfortunately Chris
>         died
>         in a mid air collision last year.  His family is still making
>         spinners,
>         but
>         I am not sure of the quality.
>         The Wade spinners have a plate that bolts onto the crush plate
>         with the
>         prop
>         bolts and the spinner fastens to this plat. It does not extend
>         over the
>         prop blades.  The only shape they are making is the Hersey Kiss.
>         Any other ideas?  I didn't see much on Spruce or anywhere else.
>         David Ullman
>         N444DX
>         President EAA 292
>         541-760-2338
>         david at davidullman.com <mailto:david at davidullman.com>
>         _______________________________________________
>         To change your email address, visit
>         http://www.tvbf.org/mailman/listinfo/reflector
>         Visit the gallery! www.tvbf.org/gallery
>         user:pw = tvbf:jamaicangoose
>         Check new archives: www.tvbf.org/pipermail
>         Check old archives:
>         http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
>     _______________________________________________
>     To change your email address, visithttp://www.tvbf.org/mailman/listinfo/reflector
>
>     Visit the gallery!www.tvbf.org/gallery
>     user:pw = tvbf:jamaicangoose
>     Check new archives:www.tvbf.org/pipermail
>     Check old archives:http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visithttp://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!www.tvbf.org/gallery  <http://www.tvbf.org/gallery>
> user:pw = tvbf:jamaicangoose
> Check new archives:www.tvbf.org/pipermail  <http://www.tvbf.org/pipermail>
> Check old archives:http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140221/4c235a4f/attachment-0001.html>


More information about the Reflector mailing list