REFLECTOR: spinner

[Jeff Barnes]

Hi Dave,  Go ahead and try it. You've got a Craig Catto recommendation, and the family has the 1 formula. Good Luck !

Jeff Barnes




________________________________
 From: David Ullman <ullman at robustdecisions.com>
To: reflector at tvbf.org 
Sent: Thursday, February 20, 2014 9:33 PM
Subject: Re: REFLECTOR: spinner
 

I am finally going to paint N-444DX, my Velosity SEFG.  It has about 120
hours on it, so it is about time.  I need a spinner.  I have a Catto fixed
pitch prop.  He recommends Chris Wade's spinners.  Unfortunately Chris died
in a mid air collision last year.  His family is still making spinners, but
I am not sure of the quality.

The Wade spinners have a plate that bolts onto the crush plate with the prop
bolts and the spinner fastens to this plat.  It does not extend over the
prop blades.  The only shape they are making is the Hersey Kiss. 

Any other ideas?  I didn't see much on Spruce or anywhere else.


David Ullman
N444DX
President EAA 292
541-760-2338
david at davidullman.com




_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20140220/e3f0f76b/attachment.html>