REFLECTOR: Hinge gap

[Kurt Winker]

Don't forget to leave room for primer & paint! 
Don't ask me how I know that ;)
I rounded the aft/outer edge of the tip sail so that the rudder wouldn't bind or chip the paint when fully deployed. 
Note: i have almost 5" of rudder travel. 

Kurt

Sent from my iPhone

> On Sep 26, 2013, at 11:29, Peter Braswell <peter.braswell at gmail.com> wrote:
> 
> All,
> Getting ready to attach my rudders to my tip sails.  
> 
> I notched back the trailing edge the prescribed 1/8".  While things look like they'll work just fine, it looks like that will leave a gap of about 1/16" which doesn't seem horrible, but should I notch further to try to close the gap even further?
> 
> TIA,
> Peter
> ------------------------------------------------------------------------
> "It's a Jungle Up There": www.zuluworks.com
> ------------------------------------------------------------------------
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130926/e00bec6e/attachment.html>