REFLECTOR: RG Pressure Switch

[John Dibble]

That's very helpful.  Thanks.

John

On 9/19/2013 2:02 PM, jerry at jlbent.com wrote:
> I recognize those switches.  They are to older style.  You adjust both 
> screws together.  Think of it as two sided of that move together to 
> keep the sensor even
> Jerry Brainard
> Jerry at JLBEnt.com
>
>
> 	-------Original Message-------
> From: aminetech at bluefrog.com
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Subject: REFLECTOR: RG Pressure Switch
> Sent: Sep 17 '13 4:15pm
>
> Attached is a picture of my switches.  The manual instructs to remove 
> the caps to adjust.  Are my caps already removed and the adjustment 
> screws are on top? Or are those screws for the cap?
>
> Thanks,
>
> John
>
>
> ------------------------------------------------------------------------
> This message was delivered by BlueFrog.com. For the best email, please 
> visit http://www.bluefrog.com
>
> If you believe this message is spam, please report to abuse at bluefrog.com.
> ------------------------------------------------------------------------
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130919/90cc856e/attachment.html>