REFLECTOR: RG Pressure Switch

[Laurence Coen]

John,

Your switches look just like mine.  As I remember, one of the screws adjusted the cut-out pressure and the other adjusted the differential between turn on and turn off.  I never tampered with them and used them set at the factory settings.  There is no cap on that switch as far as I know.

Larry Coen
N136LC


From: aminetech at bluefrog.com 
Sent: Tuesday, September 17, 2013 4:15 PM
To: Velocity Aircraft Owners and Builders list 
Subject: REFLECTOR: RG Pressure Switch


Attached is a picture of my switches.  The manual instructs to remove the caps to adjust.  Are my caps already removed and the adjustment screws are on top?  Or are those screws for the cap?

Thanks,

John


 

--------------------------------------------------------------------------------
This message was delivered by BlueFrog.com. For the best email, please visit http://www.bluefrog.com

If you believe this message is spam, please report to abuse at bluefrog.com.


--------------------------------------------------------------------------------


_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130917/fa73d509/attachment.html>