REFLECTOR: Another Step

[Dave Philipsen]

Should just be able to go here: 
http://www.tvbf.org/mailman/listinfo/reflector and enter your email 
address near the end where it mentions unsubscribe or edit options.

Dave Philipsen
Velocity STD FG
N83DP


On 9/15/2013 2:06 PM, garyglasair at aol.com wrote:
> I have been trying to be removed from the Velocity E mail list with no 
> success. Any suggestions would be appreciated.
>
> Thanks
>
> Gary
>
>
>
> -----Original Message-----
> From: Laurence Coen <lwcoen at hotmail.com>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Sun, Sep 15, 2013 11:55 am
> Subject: Re: REFLECTOR: Another Step
>
> I have my holder about 1/16" from the slip rings. The threaded rod 
> that the brush holder is mounted on is mounted on the other end in a 
> slotted bracket so I can adjust it.  There is enough give in the mount 
> so I can spring the brush holder away from the hub slightly and see 
> that the brushes remain in contact with the slip rings.  This is my 
> preflight test to make sure that the brushes aren't worn to far for 
> the next flight.
> Larry Coen
>
> *From:* Kurt Winker <mailto:nmflyer1 at aol.com>
> *Sent:* Sunday, September 15, 2013 12:41 PM
> *To:* Velocity Aircraft Owners and Builders list 
> <mailto:reflector at tvbf.org>
> *Subject:* Re: REFLECTOR: Another Step
>
> Larry,
>
> Thanks. Fabbing my coil mount now. How far away from the contact rings 
> is the edge of your brush holder housing?
>
> Kurt
>
> Sent from my iPhone
>
> On Sep 15, 2013, at 11:24, "Laurence Coen" <lwcoen at hotmail.com 
> <mailto:lwcoen at hotmail.com>> wrote:
>
>> Kurt,
>> I know John had problems with his brushes but I am using the IVO 
>> supplied ones without problems for over six years.
>> Larry Coen
>> N136LC
>>
>> *From:* John Dibble <mailto:aminetech at bluefrog.com>
>> *Sent:* Sunday, September 15, 2013 7:21 AM
>> *To:* Velocity Aircraft Owners and Builders list 
>> <mailto:reflector at tvbf.org>
>> *Subject:* Re: REFLECTOR: Another Step
>>
>> On 9/14/2013 10:45 PM, nmflyer1 at aol.com wrote:
>>> Feels like I accomplished something today. Got the 76" 3-blade 
>>> Constant speed Ivo Magnum installed & torqued. Then set the re-drive 
>>> belt play. Now, have to Fab. an adapter to hold the brushes & pickup 
>>> coil.
>>> Onward!
>>> Kurt
>>>
>>>
>>> _______________________________________________
>>> To change your email address, visithttp://www.tvbf.org/mailman/listinfo/reflector
>>>
>>> Visit the gallery!www.tvbf.org/gallery
>>> user:pw = tvbf:jamaicangoose
>>> Check new archives:www.tvbf.org/pipermail
>>> Check old archives:http://www.tvbf.org/archives/velocity/maillist.html
>> The brushes IVO supplies are small for the amount of current needed.  
>> I recommend you get larger, copper-containing brushes.  Alternatively 
>> you might consider my non-brush modification that's working very well.
>>
>> John
>> ------------------------------------------------------------------------
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail 
>> <http://www.tvbf.org/pipermail>
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail 
>> <http://www.tvbf.org/pipermail>
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> ------------------------------------------------------------------------
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail <http://www.tvbf.org/pipermail>
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visithttp://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!www.tvbf.org/gallery  <http://www.tvbf.org/gallery>
> user:pw = tvbf:jamaicangoose
> Check new archives:www.tvbf.org/pipermail  <http://www.tvbf.org/pipermail>
> Check old archives:http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130915/056b3b72/attachment.html>