REFLECTOR: Trig TT-31 ADS-B transponder

John Dibble aminetech at bluefrog.com
Thu Nov 14 06:43:12 CST 2013


Thanks.  I've decided I have to use grey code.  The wiring is already in 
place, I just remove from the old connector and plug into the new.

John

On 11/13/2013 10:32 PM, John Tvedte wrote:
> Serial is easier wiring...nothing wrong though with using grey code. 
>  You will not be able to use serial for both as you mention two 
> different baud rates.
>
>
> -------- Original message --------
> From: John Dibble <aminetech at bluefrog.com>
> Date: 11/13/2013 6:49 AM (GMT-06:00)
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Subject: REFLECTOR: Trig TT-31 ADS-B transponder
>
>
> I have my new transponder installed and it isn't sensing the serial
> input from my RMI encoder.  Before I spend more time on that, I'm
> considering just using the gray code input which is available from the
> previous transponder.  I was told that serial is better. Can anyone
> comment on that?  Also the serial out from my encoder currently goes to
> my gps to enhance satellite reception.   The gps calls for 1200 baud
> while the transponder calls for 9600.  Does this mean I can't use serial
> for both?  If so, how important is the enhancement of gps reception?
>
> Thanks,
>
> John
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector 
> <http://www.tvbf.org/mailman/listinfo/reflector>
>
> Visit the gallery! www.tvbf.org/gallery <http://www.tvbf.org/gallery>
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail <http://www.tvbf.org/pipermail>
> Check old archives: 
> http://www.tvbf.org/archives/velocity/maillist.html 
> <http://www.tvbf.org/archives/velocity/maillist.html>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20131114/a1db8f52/attachment.html>


More information about the Reflector mailing list