REFLECTOR: Trig TT-31 ADS-B transponder

[John Tvedte]

Serial is easier wiring...nothing wrong though with using grey code.  You will not be able to use serial for both as you mention two different baud rates.


-------- Original message --------
From: John Dibble <aminetech at bluefrog.com>
Date: 11/13/2013 6:49 AM (GMT-06:00)
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Subject: REFLECTOR: Trig TT-31 ADS-B transponder


I have my new transponder installed and it isn't sensing the serial
input from my RMI encoder.  Before I spend more time on that, I'm
considering just using the gray code input which is available from the
previous transponder.  I was told that serial is better.  Can anyone
comment on that?  Also the serial out from my encoder currently goes to
my gps to enhance satellite reception.   The gps calls for 1200 baud
while the transponder calls for 9600.  Does this mean I can't use serial
for both?  If so, how important is the enhancement of gps reception?

Thanks,

John
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20131114/a197b5cb/attachment.html>