REFLECTOR: Oil Cooler Duct Heater Valve
John Dibble
aminetech at bluefrog.com
Wed Nov 13 06:37:27 CST 2013
Mine is bare aluminum and good after 1200 hours. Make sure it
completely closes off the exit duct.
John
On 11/12/2013 10:38 PM, Paul Folkes wrote:
> A basic question - before I permanently fix the heater valve in
> place and close up the oil cooler duct, is it advisable to give the
> aluminium plate a going over with alodine or other corrosion
> preventative coating, or is it ok to just leave it bare shiny alum?
>
> Thanks,
>
> Paul Folkes
> XLRG
> VH-VVX
> /Building but a loooong way to go!/
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20131113/93608359/attachment.html>
More information about the Reflector
mailing list