REFLECTOR: Trig TT31 Transponder Installation
John Dibble
aminetech at bluefrog.com
Fri Nov 8 06:44:34 CST 2013
I haven't verified, however at the gps end the serial in and out are a
twisted pair, so I think it's likely. For sure there's a wire connected
to pin 7. Assuming I don't need this, the Trig instructions call for a
twisted pair for serial connections. What will the other wire be doing?
John
On 11/7/2013 11:42 PM, John Tvedte wrote:
>
> John,
>
> I believe the serial IN on the uEncoder is used for the optional RMI
> compass module. Are you sure the Serial IN on the uEncoder is wired
> to the GPS? On the DB-9 connector, Pin 7, is the Serial IN.
>
> *From:*reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org]
> *On Behalf Of *aminetech at bluefrog.com
> *Sent:* Thursday, November 07, 2013 6:56 PM
> *To:* Velocity Aircraft Owners and Builders list
> *Subject:* REFLECTOR: Trig TT31 Transponder Installation
>
> I'm getting ready to install my TT31. My RMI encoder serial out goes
> to my gps. I will reroute that to the transponder and use the
> repeater from the transponder to go to the gps. I see that the
> "serial in" to my encoder is connected. I assume that comes from the
> gps and I want to use that line to go to the transponder for ADS B
> out. Can I split the gps serial out and go to both the transponder
> and encoder or can it only go to one or the other? What function does
> the gps serial to the encoder provide?
>
> Thanks,
>
> John
>
>
> ------------------------------------------------------------------------
>
> This message was delivered by BlueFrog.com. For the best email, please
> visit http://www.bluefrog.com
>
> If you believe this message is spam, please report to
> abuse at bluefrog.com <mailto:abuse at bluefrog.com>.
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20131108/0d2bc336/attachment.html>
More information about the Reflector
mailing list