REFLECTOR: Crank Vent scavenger nozzle & Seperator

Scott Derrick scott at tnstaafl.net
Mon Mar 4 13:16:30 CST 2013


I get no oil on my cowl with an exhaust scavenger fitting.

Scott

-------- Original Message --------
Subject: REFLECTOR: Crank Vent scavenger nozzle & Seperator
From: WJ Wilbeck <wjwilbeck at gmail.com>
To: 'Velocity Aircraft Owners and Builders list' <reflector at tvbf.org>
Date: 03/04/2013 08:08 AM

> I installed an oil separator and saw little difference in the oil on the
> cowl.
>
> I then installed a scavenger nozzle to the exhaust at a 45 degree angle.
>
> I do not like it and am removing it.
>
> What happens is instead of oil on the cowl that is easy to clean off - the
> scavenged oil is burnt just enough
> To stick like glue to the cowl making it really difficult to clean.
>
> I am going to remove both the separator and scavenger nozzle.
>
> Your mileage may vary.
>
> wj
>
>
> WJ Wilbeck
> 620-727-3596
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>

-- 
I don't know half of you half as well as I should like; and I like less 
than half of you half as well as you deserve.
J. R. R. Tolkien


More information about the Reflector mailing list