REFLECTOR: Dynon Autopilot

[David Bertram]

On 6/5/2013 4:56 PM, Douglas Holub wrote:
> Is the roll servo in a grounded metal housing?
> ----- Original Message ----- From: "David Bertram" <velocitytx at att.net>
> To: <reflector at tvbf.org>
> Sent: Wednesday, June 05, 2013 5:42 PM
> Subject: REFLECTOR: Dynon Autopilot
>
>
>> I have the Dynon Skyview with autopilot in my Velo.  I have been 
>> having problems with the roll servo.  It would check out ok on the 
>> ground but when I got ready to take-off it would fail.  All wiring 
>> and connections were checked and rechecked.  I found that when I 
>> turned my transponder on it would fail my roll servo.  My transponder 
>> antenna was located close to my roll servo.  I moved my transponder 
>> antenna about three feet from the servo and now my roll servo works 
>> great. Dynon said they had not heard of this problem before.
>> _______________________________________________
>> To change your email address, visit 
>> http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery!  www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html 
>
> _______________________________________________
> To change your email address, visit 
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
My roll servo is not grounded as dynon did not mention that.
Dave B
N350TX