REFLECTOR: Prop dia
nmflyer1 at aol.com
nmflyer1 at aol.com
Thu Jun 6 10:55:36 CDT 2013
For me, needed a way to use the 340 HP and huge amount of torque from my V-6.
IVO was the only company that actually asked me a lot of questions, ran the numbers & suggested the biggest prop I could make fit.
MT just quoted me a huge price... didn't trust their approach.
Kurt
-----Original Message-----
From: John Dibble <aminetech at bluefrog.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Thu, Jun 6, 2013 7:12 am
Subject: Re: REFLECTOR: Prop dia
On 6/5/2013 4:13 PM, Ron N VelocityXLFG wrote:
> I have a 72 dia prop on my XLFG I am going to try a 76 inch Dia Ivo
> propeller and I am a little concerned with the clearance . Seems
> like I have plenty even with a high rotation angle. Is there any other
> concerns or advice out there for this configuration.
>
> Ron
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
If you do have ground contact, the blades are easily repairable or you
can cut a little off the ends. My 220 HP Franklin uses a 68" IVO prop.
76" seems like a lot. What is the objective?
John
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
Visit the gallery! www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130606/d7cb582d/attachment.html>
More information about the Reflector
mailing list