REFLECTOR: Does anyone have their starter contactor on the firewall?

Tim Rhodenbaugh timrhod at aol.com
Wed Jul 17 13:18:33 CDT 2013


It's been done. I put mine on the firewall. Are you sure it's the starter contractor on the pump assembly board and not the master contractor?   Tim Rhodenbaugh n370TR XLRG

Sent from my iPad

On Jul 17, 2013, at 2:10 PM, Don Johnston <numa at comcast.net> wrote:

> I've got the gear pump assembly from Wayne Lanza which has the battery and the starter contactor on it. 
> 
> I'm looking at the wiring and having to run the B-leads from the alternators all the way up to the nose. It occurred to me that I if the starter contactor was on the firewall that I could run the alternators to the battery side of the starter contactor which would allow me to utilize the low gauge wire already in place between the the starter and battery contactor. 
> 
> But every Velocity that I've looked at has the both contactors in the front. 
> 
> Just wondering anyone has their starter contactor on the firewall.
> 
> -Don Johnston
> XL-RG
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
> 
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



More information about the Reflector mailing list