REFLECTOR: Towing
David Rene Dugas
renedugas at gmail.com
Thu Apr 18 16:32:59 CDT 2013
Yes.
I don't know if the nose gear pivot bolt broke causing the reinforcing "taco" weld to break or the reverse or something else. But I replaced the nose gear and added the dampener. A Velo shimmy is not like a Cessna shimmy. Not the same animal at all.
I'll send a couple pics of the gear too FYI.
Rene' Dugas
Sent from an Apple.
On Apr 18, 2013, at 9:52 AM, Ron N VelocityXLFG <velocityxl at fastmail.fm> wrote:
> Tire looks pretty chewed up did that happen before you installed the damper?
>
> Ron
>
> On 4/18/2013 7:54 AM, David Rene Dugas wrote:
>> I use an electric tow that clamps on two machined depressions one on each side of the forks. Everything has compromises so they are only 3/8 " deep. The tow clamps on and away I go on RG. My hanger has a lip too. My choice solo is to power into the hanger or tow. I push or pull on the canard all other times and always(so far) ask the linemen to let me park so they will not need to move me.
>>
>>
>>
>>
>>
>> Rene' Dugas
>> Sent from an Apple.
>>
>>
>> _______________________________________________
>> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>>
>> Visit the gallery! www.tvbf.org/gallery
>> user:pw = tvbf:jamaicangoose
>> Check new archives: www.tvbf.org/pipermail
>> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20130418/4e006d57/attachment.html>
More information about the Reflector
mailing list