REFLECTOR: Repairs

Douglas Holub douglas.holub at gmail.com
Fri Sep 21 17:37:58 CDT 2012


Mine protrude a little.  No bubbling on the cowl.  I put aluminum tape on the inside of the cowl near the pipes.
  ----- Original Message ----- 
  From: Lou Stedman 
  To: Velocity Reflector 
  Sent: Friday, September 21, 2012 1:08 AM
  Subject: REFLECTOR: Repairs


  I have two repairs to do to my bird.

  First, while I was on a trip this week, I was forced to tie my plane outside. There was a large storm with high winds that came through and blew my right rudder so that the bell crank  is now loose. What is the best way to repair this?

  Second, I am getting severe bubbling on my lower cowl, around the exhaust tube. I am running a straight pipe out both right and left side. The end of my pipe is about 1” inside the cowl. There is a metal heat shield applied to the cowl with high temp silicone. Do your pipes extend out of the cowl and how much clearance around the pipes do you have? If you have any pictures I would love to see them.

  Thanks for any advice you may have.

  Lou Stedman
  Velocity SEFG
  N7044Q
  Olean, NY


------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120921/ca19c736/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Exhuast Pipes.JPG
Type: image/jpeg
Size: 76556 bytes
Desc: not available
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120921/ca19c736/attachment-0001.jpe>


More information about the Reflector mailing list