REFLECTOR: Glareshield-panel interface

[Stockman, Bill]

Mine just lays on the top and is attached with a single small L-bracket to the panel.    All you see is a single screw.   Its strong enough so that if a rider "accidently" grabs it in a moment of euphoria (or terror) it won't come loose.

Bill Stockman
Senior Associate
Dayton Aerospace, Inc.

937.426.4300  Office
937.369.4799  Cell
bill.stockman at daytonaero.com<mailto:bill.stockman at daytonaero.com>
www.daytonaero.com

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Scott Derrick
Sent: Thursday, May 31, 2012 10:13 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Glareshield-panel interface

mine is not cut.

-------- Original Message --------
Subject: REFLECTOR: Glareshield-panel interface
From: Don Johnston <numa at comcast.net><mailto:numa at comcast.net>
To: reflector at tvbf.org<mailto:reflector at tvbf.org>
Date: 05/31/2012 08:05 AM

Do many people cut a slot in the bottom of the glareshield for the top of the instrument panel to fit into? It seems that this would weaken the part of the glareshield that extends aft of the panel (eyebrow).

-Don
XL-RG




_______________________________________________

To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector



Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>

user:pw = tvbf:jamaicangoose

Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>

Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



--

Always do right. This will gratify some people and astonish the rest.

Mark Twain
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120531/56846138/attachment.htm>