REFLECTOR: Oil cooler (FG)

Grover McNair grover at mcnairperformance.com
Thu May 17 13:45:20 CDT 2012


P20104C

8 Two Pass

8" x 5.64" x 3.62"

4214MN

Various

4214

$186.95

This is copied from the Aircraft Spruce website. There are two slightly
larger ones that are two pass coolers also. Check your dimensions and use
the one that fits best.

Grover

 

  _____  

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Kevin Baker
Sent: Thursday, May 17, 2012 1:18 PM
To: Velocity Aircraft Owners and Builders list
Cc: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Oil cooler (FG)

 

What did you find was better and what model did you get?

 

Thanks

Kevin Baker

.


On May 17, 2012, at 12:10 PM, "Grover McNair" <grover at mcnairperformance.com>
wrote:

After much research I decided on the positech oil cooler also. The two pass
design works very well.

Grover McNair

 


  _____  


From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of nmflyer1 at aol.com
Sent: Thursday, May 17, 2012 11:18 AM
To: reflector at tvbf.org
Subject: Re: REFLECTOR: Oil cooler (FG)

 

My Velocity is too different to help with comparison. However: 

 

I have not had very good luck with the airflow style of coolers. I had one
in my 180 and 235, and had constand weeps, leaks, high temps, etc. (even
after "repaired/Refurbished").

 

I switched to this style:
http://www.aircraftspruce.com/catalog/eppages/positech.php    

Have not had a single problem since in almost 1000 hrs. Temps are better, no
leaks, etc. 

 

Might help in the V as well. 

 

Kurt 




-----Original Message-----
From: Kevin Baker <flykb at verizon.net>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Thu, May 17, 2012 8:38 am
Subject: REFLECTOR: Oil cooler (FG)

Hi All
I'm thinking of replacing my oil cooler (FG) with a bigger one to get my oil

temps down during hot Texas days.
I dont have room in the whine compartment for a 2nd.
So my question is who makes the most efficient oil cooler or are they all
about 
the same?
I was looking to replace mine with a 2008x airflow.
Running an io360 200hp
 
Thanks for the thoughts
Kevin Baker 
N164PS
 
.
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector
 
Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120517/b2d77623/attachment-0001.htm>


More information about the Reflector mailing list