REFLECTOR: Nose gear microswitch
John Dibble
aminetech at bluefrog.com
Tue May 15 19:33:54 CDT 2012
I like that. I would have to remount the switch to keep the end of the
arm on the keel?
On 5/15/2012 5:53 PM, sbjknox wrote:
>
> ----- Original Message ----- From: "John Dibble" <aminetech at bluefrog.com>
> [snip]
>> The problem seems to be that the linkage flexes more and exceeds
>> the switch travel, bending the switch. Then the light won't come on
>> when the gear is down. Is there a switch that has more travel in the
>> closed position, or a way to modify mine?
>>
>> Thanks,
>> John
>
> Hi John,
> I had to modify my switch for more travel. I extended the lever arm
> using a small spring fastened to the original arm. Inside the end of
> the spring, I threaded a small bolt (or large machine screw, I don't
> remember which, but whatever fits) that contacts the gear as did the
> little wheel on the switch originally. Basically, a longer, springy
> lever arm.
> Sorry, no photo available.
>
> Sid Knox
> Oklahoma
>
> Velocity 173 RG N199RS
> Starduster N666SK
> KR2 N24TC
> W7QJQ
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
More information about the Reflector
mailing list