REFLECTOR: Changing Mag wires IO360

Tom Cacek hytec45 at aol.com
Tue May 15 06:05:16 CDT 2012


I thought the advice needed was for a Lyc IO-360.  Sorry. 


-----Original Message-----
From: John Dibble <aminetech at bluefrog.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Sent: Mon, May 14, 2012 4:36 pm
Subject: Re: REFLECTOR: Changing Mag wires IO360


              Tom,
    The problem I had with my Franklin engine was that there wasn't    enough room to remove the screws, once loosened.
    
    John
    
    On 5/14/2012 11:54 AM, Tom Cacek wrote:    
            
 Use a close quarters ratcheting screw driver.  They are a        small ratchet that accepts 1/4" hex screw driver bits.  No big        deal with the right tool. 
      
-----Original Message-----
        From: Kevin Baker <flykb at verizon.net>
        To: Velocity Aircraft Owners and Builders list        <reflector at tvbf.org>
        Sent: Mon, May 14, 2012 11:54 am
        Subject: REFLECTOR: Changing Mag wires IO360
        
        
          
Hi All
I was wondering if anyone had any suggestions for changing out mag plug wires.
I have a std with an IO360 and it's pretty close between the mag and the 
firewall.
Was wondering what a good procedure may be.

Thanks
Kevin Baker
N164PS

.
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

        
      
      
      
      
      
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
    
    
  
 
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120515/a26e3d10/attachment.htm>


More information about the Reflector mailing list