REFLECTOR: Changing Mag wires IO360

John Dibble aminetech at bluefrog.com
Mon May 14 12:07:49 CDT 2012


Tom,
The problem I had with my Franklin engine was that there wasn't enough 
room to remove the screws, once loosened.

John

On 5/14/2012 11:54 AM, Tom Cacek wrote:
> Use a close quarters ratcheting screw driver.  They are a small 
> ratchet that accepts 1/4" hex screw driver bits.  No big deal with the 
> right tool.
> -----Original Message-----
> From: Kevin Baker <flykb at verizon.net>
> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
> Sent: Mon, May 14, 2012 11:54 am
> Subject: REFLECTOR: Changing Mag wires IO360
>
> Hi All
> I was wondering if anyone had any suggestions for changing out mag plug wires.
> I have a std with an IO360 and it's pretty close between the mag and the
> firewall.
> Was wondering what a good procedure may be.
>
> Thanks
> Kevin Baker
> N164PS
>
> .
> _______________________________________________
> To change your email address, visithttp://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!www.tvbf.org/gallery  <http://www.tvbf.org/gallery>
> user:pw = tvbf:jamaicangoose
> Check new archives:www.tvbf.org/pipermail  <http://www.tvbf.org/pipermail>
> Check old archives:http://www.tvbf.org/archives/velocity/maillist.html
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120514/0028fa3f/attachment.htm>


More information about the Reflector mailing list