REFLECTOR: OAT
John Dibble
aminetech at bluefrog.com
Mon Mar 12 10:40:54 CDT 2012
Mine is in the fresh air naca also. The reading must be corrected by
a few degrees because of the pressure effect. My RMI encoder has this
correction built in.
John
On 3/12/2012 10:33 AM, Stockman, Bill wrote:
> I put mine in the fresh air naca, works great.
>
> Bill Stockman
> Senior Associate
> Dayton Aerospace, Inc.
>
> 937.426.4300 Office
> 937.369.4799 Cell
> bill.stockman at daytonaero.com
> www.daytonaero.com
>
> -----Original Message-----
> From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Ruben Creus
> Sent: Monday, March 12, 2012 9:57 AM
> To: reflector at tvbf.org
> Subject: REFLECTOR: OAT
>
> I am planning to relocate my OAT sensor as I discovered that it is picking some heat from the radiator in the actual position and the reading is not accurate. I thought having it sticking out in the belly, but to avoid icing I wanted to install in the front of the sensor something to diffuse the direct air. Has anyone gone this path? Any ideas or suggestions for what is the best location or install?
>
> Ruben
>
>
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check new archives: www.tvbf.org/pipermail Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
>
More information about the Reflector
mailing list