REFLECTOR: Nylaflow fittings

Alex Balic velocity_pilot at verizon.net
Tue Mar 6 16:08:05 CST 2012


No, but the braided sure will- that would be your problem right there- 

-----Original Message-----
From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On
Behalf Of Scott Derrick
Sent: Tuesday, March 06, 2012 12:53 PM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: Nylaflow fittings

All my lines are nylaflow or highpressure braided steel over rubber, no
aluminum.

you think the aluminum may be expanding a lot when you apply the brakes?

Scott

-------- Original Message --------
Subject: Re: REFLECTOR: Nylaflow fittings
From: Brian Michalk <michalk at awpi.com>
To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
Date: 03/06/2012 11:39 AM

> You are using 1/8" aluminum lines?
>
> I'll check the sliding assembly again this weekend. One bad thing 
> about this small line, it's real easy to kink it with a 4" chock on the
floor.
>
> On 3/6/2012 10:56 AM, Scott Derrick wrote:
>> My lines are 1/8, my brakes are the upgraded Matco's.
>>
>> My brakes don't seem to behave any different than the 210's or the 
>> Bonanza that I fly? I know they release instantly. It sounds like 
>> something is binding up. Be sure the slide bolts are not bumping up 
>> against the gear leg, I had to wallow out a couple hallows for mine.
>> If they are touching the leg they can get miss-aligned and bind.
>>
>> that would account for the extra force required and the laggy release.
>>
>> Scott
>>
>> -------- Original Message --------
>> Subject: Re: REFLECTOR: Nylaflow fittings
>> From: Brian Michalk <michalk at awpi.com>
>> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
>> Date: 03/06/2012 09:30 AM
>>
>>> I think the standard nylaflow is 3/16. I don't know what the ID is. 
>>> I tried 1/8".
>>>
>>> Is anyone else using 1/8" brake lines? I also thought that the pads 
>>> would sit just off the disk, and the instant pressure applied, it 
>>> would engage the disk. Well, that's just not happening, and 
>>> releasing the brakes is also laggy.
>>>
>>> If one watches the brake assembly, you can see it flex with the 
>>> application of clamping force. It's because the "C" clamping system 
>>> is pretty flimsy. If it were rigid, I don't think I would see the 
>>> same behavior.
>>>
>>> On 3/6/2012 8:41 AM, Scott Derrick wrote:
>>>> I think you have some other problem, blaming brake line size..
>>>>
>>>> I have the standard itsy bitsy lines and my brakes work fine..
>>>>
>>>> Scott
>>>>
>>>> -------- Original Message --------
>>>> Subject: REFLECTOR: Nylaflow fittings
>>>> From: Brian Michalk <michalk at awpi.com>
>>>> To: Velocity Aircraft Owners and Builders list <reflector at tvbf.org>
>>>> Date: 03/05/2012 03:55 PM
>>>>
>>>>> I did some taxi testing this weekend after fixing a toe-in and 
>>>>> camber issue.
>>>>>
>>>>> The problem I am having now is that my 1/8" brake lines are just 
>>>>> not big enough to transfer fluid without being sluggish. It works, 
>>>>> but is annoying. I think it would work if the master cylinder 
>>>>> didn't retract.
>>>>>
>>>>> Anyway, I am going to eventually go to 1/4" line, but in the 
>>>>> meantime want to go back to nylaflow. What are those compression 
>>>>> fittings that work with the 3/16 Nylaflow?
>>>>> _______________________________________________
>>>>> To change your email address, visit 
>>>>> http://www.tvbf.org/mailman/listinfo/reflector
>>>>>
>>>>> Visit the gallery! www.tvbf.org/gallery user:pw = 
>>>>> tvbf:jamaicangoose Check new archives: www.tvbf.org/pipermail 
>>>>> Check old archives:
>>>>> http://www.tvbf.org/archives/velocity/maillist.html
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> To change your email address, visit
>>> http://www.tvbf.org/mailman/listinfo/reflector
>>>
>>> Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose 
>>> Check new archives: www.tvbf.org/pipermail Check old archives: 
>>> http://www.tvbf.org/archives/velocity/maillist.html
>>>
>>
>
> _______________________________________________
> To change your email address, visit
> http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery! www.tvbf.org/gallery user:pw = tvbf:jamaicangoose 
> Check new archives: www.tvbf.org/pipermail Check old archives: 
> http://www.tvbf.org/archives/velocity/maillist.html
>

--
What the superior man seeks is in himself; what the small man seeks is in
others.
Confucius
_______________________________________________
To change your email address, visit
http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery user:pw = tvbf:jamaicangoose Check
new archives: www.tvbf.org/pipermail Check old archives:
http://www.tvbf.org/archives/velocity/maillist.html



More information about the Reflector mailing list