REFLECTOR: First flight

Chris Barber cbarber at texasattorney.net
Mon Jun 11 14:21:35 CDT 2012


I resisted the urge to be a teXt pilot and text all you guys that, hey, I am flying right now. Perhaps I should have considered Twitter.  ;-)

Sent from my iPhone 4

On Jun 11, 2012, at 2:03 PM, "Mark Magee" <edjonesbrady at gmail.com<mailto:edjonesbrady at gmail.com>> wrote:

These are not utterances of a brave Text Pilot....
OK to think them, just no voicing.
Remember who you are TEXT PILOT!

Mark B. Magee
Sent from IPhone 4

On Jun 11, 2012, at 1:20 PM, Chris Barber <cbarber at texasattorney.net<mailto:cbarber at texasattorney.net>> wrote:


Nope, no buddies around.  I didn't want an audience or the pressure from others....also, I would not have liked others to witness if I became a lawn dart.



I will consider the camera.  It should prove useful.



Chris

________________________________
From: reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org> [reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org>] on behalf of Alex Balic [velocity_pilot at verizon.net<mailto:velocity_pilot at verizon.net>]
Sent: Monday, June 11, 2012 1:04 PM
To: 'Velocity Aircraft Owners and Builders list'
Subject: Re: REFLECTOR: First flight

Chris—
Are you telling me you didn’t have one of your buddies taping the momentous flight from the ground? Not you, say it isn’t so…
BTW- you should get a go-pro video camera and mount it on the headliner to record everything going forward!

Alex

From: reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org> [mailto:reflector-bounces at tvbf.org] On Behalf Of Chris Barber
Sent: Monday, June 11, 2012 10:01 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: First flight


Rieff,



No worries, you will likely hear more from me...shutting me up will be the problem.



Alex,



The video is really large and is mostly engine noises and black screen.  I admit, it is interesting to be able to hear the wheels touch down and the change in pitch of the engine.  I am attempting to attach a short except but it may be too big to get through.



Chris

________________________________
From: reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org> [reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org>] on behalf of Reiff Lorenz [Reiff at Lorenz.com<mailto:Reiff at Lorenz.com>]
Sent: Monday, June 11, 2012 8:56 AM
To: Velocity Aircraft Owners and Builders list
Subject: Re: REFLECTOR: First flight

Chris,

That's terrific! Very exciting to hear of your first flight. I know you've been working toward this for a long time.

It's stories like these that motivate me to keep working on my pile of parts.

We'd love to hear more about your flight testing in the weeks ahead.

Reiff Lorenz, Dayton, OH
Velocity XL-RG, 33% complete
Currently working on: RG pulleys






From: reflector-bounces at tvbf.org<mailto:reflector-bounces at tvbf.org> [mailto:reflector-bounces at tvbf.org] On Behalf Of Chris Barber
Sent: Saturday, June 09, 2012 12:50 PM
To: REFLECTOR
Subject: REFLECTOR: First flight

Oops. I hit send by mistake to the Reflector when halfway done. Here is the complete post.

June 9, 2002 - A trailer pulled up in front of a simple but comfortable home in Houston.

Lots of trails, tribulations blood, time, money, recreation, education, fun, friendships, anger, frustration, problem solving, sweat, pondering etc....repeat and repeat again and again.

Fast forward (it did go fast)

June 9, 2012<https://remotemail.ever-tek.com/owa/UrlBlockedError.aspx> - Ellington Field - A lone, very nervous man arrives at the airport shortly before 0900 hrs. Pushes onto the ramp the contraption composed of fiberglass, metal et al and the ingredients listed above. He sits down and writes a simple holographic (hand written) will and short note with information to call "Mom" and work. Calls tower to relay intent via the phone.

Preflights the contraption. Gets in, goes though basic Checklist. Cranks up the engine, which fires right up. Taxi to Juliet. Calls tower to verify intent and to taxi to active, 35L. Taxis to Taxiway Echo. Checks temps. Pushing 195 with OAT reading 95 degrees (geesh it is only about 0930 hrs).

Cleared to take active and hold. Taxied out. Lined up castering nose wheel down center stripe. Cleared to take off. Added power and engine smoothly ran up. Airspeed coming in. 30 kts...50 kts ....60 kts, approximate rotation speed. Lots of runway (9000 ft).....hold it....70 kts....72 kts... Slight pull on the yoke....AIRBORNE!!! Leaped into ground effect. Screw this, pulled back on yoke and I am climbing. Jiggled the yoke a bit to verify control authority.

Climbed to about 400 feet and turned right pattern to crosswind. The Dynon altitude and airspeed seem to be working. That's reassuring. Pattern altitude is only 600 feet and I was there already as I turned to downwind. Leveled off and noticed the clouds were lower than reported and appeared on the ground. Also, noticed coolant temps had dropped to 190....but oil temps were flashing at me and had reached 225 (synthetic Royal Purple). Damn. Ok. Fly the airplane, the oil is not at not a critical level. , but let's just finish the pattern and land. I grabbed my phone while on downwind and attempted to record some data but while I can hear the engine the video is  awful....uh, in my defense, I was a bit distracted and way more concerned with flying. I called the tower and informed them I was coming in. I think they were looking out for me since as I turned to base I noticed the fire department staged just off the runways threshold

I noted I was a bit far out on down wind so I stared easing over to turn base. Wow. I really overshot it as I blew by the runway and had to use full right rudder to get back to the runway. I wish I had had more rudder. In hindsight I think I was not using much aileron as I was cognoscente that I had no idea of stall characteristics so I did not yet wish too strep a turn. I was able to get over the runway and dump some altitude as I got over the numbers and pulled power. Crap, I am fast. I am lined up and right on the numbers but at 95 kts. I come and touchdown and bounced. Pulled power to idles and settled down easily but fast at 90 and rolled out and exited at Delta. The tower was clearing me back to the city hangars as I was exiting the active. I taxi back and noticed the oil temps had decreased but I don't recall how much, just noticed they were lower.

I got back to my hangar and popped the door and shut her down. The engine went silent without any hissing or gushing.

I called my mom.

I am mowing informing the world.

I did a walk around and did not see anything missing. I am about to pull the cowl and check things out.

I did notice I did not develop a slight hand shaking untill after I landed and exited the aircraft. ;-) Hey, how about that, it really is an aircraft now. Ten years to the day following delivery.

Thank you for your support.

Christopher Barber, JD
Houston, Ellington Field (EFD)
Velocity N17010
Turbo Rotary 13b
RWS Re-drive and engine computers
Dynon Skyview
Mistral intake


Sent from my iPhone 4
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
_______________________________________________
To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

Visit the gallery!  www.tvbf.org/gallery<http://www.tvbf.org/gallery>
user:pw = tvbf:jamaicangoose
Check new archives: www.tvbf.org/pipermail<http://www.tvbf.org/pipermail>
Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120611/a74b5a9b/attachment-0001.htm>


More information about the Reflector mailing list