REFLECTOR: Flight video N17010

[John Dibble]

On 7/15/2012 5:31 AM, Chris Barber wrote:
> There didn't seem to be. I had flight four yesterday. Everything was 
> going fine when I felt a vibration from the back. Not severe but I 
> took the closest runway and landed.
>
> Upon landing I discovered the leading edge tape from one of the prob 
> blades had departed and another looked as if it was ready to do the same.
>
> I need to figure out why. These stainless steal tapes are quite 
> difficult to remove as I replaced them following ground testing but 
> now are not staying attached. IVO. Has a online vid describing the 
> installation including superglue along the edge of the tape, which I 
> followed, but still have the issue. Perhaps some of the super 77 
> adhesive by 3M?
>
> Thoughts from the collective are welcome.
>
> Chris
I've had similar problems with the IVO SS tape.  I switched to Propguard 
which sticks great and protects better than the SS tape.  Now I use 
leading edge tape from A/S which is 1/2 the price and works just as well.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120715/8b51ef23/attachment.html>