REFLECTOR: Fuel Flow Transducer

[Jones Nick]

That's exactly how it comes from Cirrus. I only changed the outlet hose to SS line. Everything else is exactly from the Cirrus engine. The Cirrus that this engine came from had an Avidyne  glass panel so I don't know what brand the transducer is. It looks exactly like the transducer I got with my VM1000. I don't think there are a lot of transducer makers out there. I have plugged it in and it seems to work with the VM1000 system. Having said that I have not checked for accuracy, just function at this point.

Best regards,

Nick and Connie Jones
Velocity XL-RG
N10CN
99% done 90% to go

From: reflector-bounces at tvbf.org [mailto:reflector-bounces at tvbf.org] On Behalf Of Don Johnston
Sent: Friday, July 06, 2012 9:13 AM
To: reflector at tvbf.org
Subject: Re: REFLECTOR: Fuel Flow Transducer

Nick,

Thanks so much!

Whose transducer is that? I have an EI.

Did you make the SS cover?

-Don


From: Jones Nick <nick.jones at volvo.com<mailto:nick.jones at volvo.com>>
To: "Velocity Aircraft Owners and Builders list (reflector at tvbf.org<mailto:reflector at tvbf.org>)" <reflector at tvbf.org<mailto:reflector at tvbf.org>>
Date: Fri, 6 Jul 2012 14:47:41 +0200
Subject: REFLECTOR: FW: Fuel flow transducer

Don,

These are the pictures of my flow transducer installation.

This looking forward. You can see the stainless cover over the transducer.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120706/cb3afe3b/attachment-0001.htm>