REFLECTOR: fuel flow transducer IO-550N

[Don Johnston]

Maybe that's the way Cirrus does it also.  That would explain why I
couldn't figure out where the mounting bracket was.

I would think a rigid fuel line would have to be used between the pump and
spider for this method.

-Don
================

Mine(io520) is also located on the fire wall.

However I mounted a fuel flow sensor on a T210, that was mounted right
above Cyls 2-4. That was per the STC for the installation.  It was put in
the line to the spider from the fuel controller. Not really mounted to
anything but the fuel line. It was then wrapped with a fire resistant cloth.

Scott
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120704/ebc27c94/attachment.htm>