REFLECTOR: Cabin Heat - Damper Install

John Dibble aminetech at bluefrog.com
Mon Jan 16 08:44:01 CST 2012


Yes.  That's why I did it this way.

John

Ruben Creus wrote:

> John,
>
> Would this also allow you to keep air flowing into the cooler while on the
> ground on a hot day? If that were the case then you kill to birds with one
> stone!
>
> Ruben
>
> -----Original Message-----
> From: John Dibble [mailto:aminetech at bluefrog.com]
> Sent: Sunday, January 15, 2012 8:06 PM
> To: Velocity Aircraft Owners and Builders list
> Subject: Re: REFLECTOR: Cabin Heat - Damper Install
>
> This 3rd pic is of the blower which sits on top and partly inboard of
> the naca.  The blower is a 3" bilge blower.  Even though the door is a
> close fit, a lot of air escapes by it because there is a lot of
> resistance going through the cooler.  That may be the reason others
> aren't getting enough heat with the blowers.  A perfect seal is needed
> to get all the air to go through the cooler.
>
> John
>
> _______________________________________________
> To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector
>
> Visit the gallery!  www.tvbf.org/gallery
> user:pw = tvbf:jamaicangoose
> Check new archives: www.tvbf.org/pipermail
> Check old archives: http://www.tvbf.org/archives/velocity/maillist.html



More information about the Reflector mailing list