REFLECTOR: Cabin Heat

[Ron N Velocity XLFG]

I did the same thing  using a flap to close off the incoming air and use a blower to recirculate the cabin air . The 
Issue I have is the centrifugal blower I have really does not move enough air  . I need a much larger blower to move 
the air through the exchanger.  Also now I am concerned about oil temps that a few people have spoke about.
  ----- Original Message ----- 
  From: Ruben Creus 
  To: 'Velocity Aircraft Owners and Builders list' 
  Sent: Monday, January 16, 2012 12:02 AM
  Subject: Re: REFLECTOR: Cabin Heat


  Pretty cool!

   

  Ruben

   


------------------------------------------------------------------------------

  From: Don Johnston [mailto:don at numa.aero] 
  Sent: Sunday, January 15, 2012 8:24 PM
  To: reflector at tvbf.org
  Subject: REFLECTOR: Cabin Heat

   

  These are pictures of my oil cooler door

  Open:
  http://www.velocity-xl.com/pictures/2008/IMG_7169.JPG

  Closed:
  http://www.velocity-xl.com/pictures/2008/IMG_7170.JPG

  Inside:
  http://www.velocity-xl.com/pictures/2008/IMG_7155.JPG





------------------------------------------------------------------------------


  _______________________________________________
  To change your email address, visit http://www.tvbf.org/mailman/listinfo/reflector

  Visit the gallery!  www.tvbf.org/gallery
  user:pw = tvbf:jamaicangoose
  Check new archives: www.tvbf.org/pipermail
  Check old archives: http://www.tvbf.org/archives/velocity/maillist.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.tvbf.org/mailman/private/reflector/attachments/20120116/0acdc2c0/attachment-0001.htm>